Exterior

Weathershield Sealer E1000

Low Sheen Finish

Superior quality acrylic water-based alkali-resisting sealer for both exterior and interior masonry surfaces.

Healthcare

Residential

Education

Commercial

Key Information

CoverageUp to 10 m²/L


Drying Time1 - 2 Hours

Product Enquiry

Ask us anything related to this product. We will get back to you as soon as possible.

Ask Us

Product Description

Superior quality acrylic water-based alkali-resisting sealer for both exterior and interior masonry surfaces. It is a certified green label product.

Download PDF

1. To read more on the product, select the PDF you wish to download.

2. Please enter your email address into the form below to download PDF.

Features

  • High performance water-based alkali resisting sealer.
  • Minimizes the risk of efflorescence

Tips & Advice

Surface Preparation
Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. Remove all loose or defective paint or powdery residues by thorough brushing and scraping, using a stiff fiber brush and high pressure water jet. Treat any areas affected mould, lichens, algae and moss with Dulux Professional Fungicidal Wash. Repair any surface defects with an appropriate filler. Surfaces that remain powdery, friable or chalky after thorough preparation should be sealed with one coat of an appropriate Sealer (see below System Recommendation). Do not paint if the wall is saturated with dampness. (Protimeter reading higher than 16%). Allow excess moisture to evaporate.

Application Tools
By roller, brush or conventional/airless spray.

Dilution
Ready to use. Dilute up to 10% with potable water when necessary if application by brush or roller. For conventional spray application, thin up to 30%. Note: Excessive dilution from that recommended will result in low coverage and may impact application properties and colour.